cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Canon R6 Mark II Buffer Issue

CarterS66
Contributor

Whenever I take anything more than one picture on my R6 m2, the camera buffers for about 4 seconds for each picture before letting me see them. I’ve used a new battery, new V90 Lexar Proffesional SD card, and different lenses. The problem happens in both RAW and JPEG, and I’ve used all 3 types of shutters and the problem persists. Is there any way to fix this?

1 ACCEPTED SOLUTION

Anonymous
Not applicable

Do you have any lens corrections enabled? Some of those cause a delay to apply to the photo before saving to the card.

View solution in original post

4 REPLIES 4

Anonymous
Not applicable

Do you have any lens corrections enabled? Some of those cause a delay to apply to the photo before saving to the card.

This seemed to have fix it, I had the aberration correction setting on high. Thanks for your help

Anonymous
Not applicable

You're welcome.

Peter
Authority
Authority

Also make sure that you have low level formatted the card in camera.

Announcements