10-03-2020 09:12 AM
Hello All Help. The mode button not working and the shooting mode menu will not display so I can switch from P to M or anything. I reset to factory settings.
Solved! Go to Solution.
10-05-2021 08:43 PM
I've had my R since June 2019 and never had that problem. I know you reset to factory settings, but try checking this setting for the heck of it. Go to your MENU, then to the orange tab with the camera with 3 dots underneath it. Then go to Tab #4 and select "Customize Buttons." Scroll down until you see the MODE button and make sure that it shows "MODE: MODE." I'm not sure what else to suggest but will think on it. How long have you had your camera?
10-04-2020
12:54 AM
- last edited on
10-02-2021
08:11 AM
by
Danny
Hi there,
The only thing I could think of would be to press the [LOCK] button to make sure it has not locked your functions, althought hat usually would not persist through clearing the settings. If the [LOCK] button doesn't change anything then it would be a good idea to have a technician check it out.
https://www.usa.canon.com/internet/portal/us/home/support/service-repair
10-02-2021 05:42 AM
Have you been able to fix. Mine has done the same
10-05-2021 08:43 PM
I've had my R since June 2019 and never had that problem. I know you reset to factory settings, but try checking this setting for the heck of it. Go to your MENU, then to the orange tab with the camera with 3 dots underneath it. Then go to Tab #4 and select "Customize Buttons." Scroll down until you see the MODE button and make sure that it shows "MODE: MODE." I'm not sure what else to suggest but will think on it. How long have you had your camera?
07/24/2025: New firmware updates are available.
EOS R5 Mark II - Version 1.1.1
07/23/2025: New firmware updates are available.
7/17/2025: New firmware updates are available.
EOS R6 Mark II - Version 1.6.0
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
12/18/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.