02-22-2019 01:22 PM
02-22-2019 03:12 PM
If the diopter is correct (i.e.the green characters look sharp) then:
1. are you inbright conditions trying to focus on a subject with good contrast?
2. when you say only one or two focus points light up is that when you have it set for all focus points active or when you select one focus point and move the selected point around the viewfinder? (It's not uncommon that all points don't ligt up since maybe only one or two find a subject to focus on.)
3. If the green chatacters are sharp and the focus points aren't did anything happen to affect the focusing screen?
02-22-2019 03:20 PM
02-22-2019 03:25 PM
02-22-2019 03:57 PM
@Branndena1 wrote:
The focus points are still blurry but it seems to be focusing just fine now
This does not compute.
02-22-2019 04:03 PM
02-22-2019 04:10 PM
02-22-2019 04:42 PM
02-23-2019 12:39 PM
" I have checked the diopter settings and that is perfectly fine."
I doubt it. Do a critical check again. If you wear glasses it may be more difficult. Plus the diopter has limits to what it can adjust. You can get additional diopter support for the eyepiece but I don't know it is available for the T5.
02-22-2019 01:51 PM
The first thing to try is to reset the camera to defaults thru your settings menu in case something got set wrong.
07/01/2024: New firmware updates are available.
06/06/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.4.0
Speedlite EL-5 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.