cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Auto Lighting Optimizer - Changes shutter speed in manual?

CaPpedDoG
Apprentice

Hi, I have a question regarding ALO. I recently enabled it on my 1DX and have since noticed my shutter speed will automatically change slightly once in awhile (while shooting in manual with auto ISO.) For example: I set my shutter speed to1/60 and it will occassionally drop to 1/50 and then jump back to 1/60. I've checked the instructions but couldn't find anything regarding this. It only happens with ALO enabled.

Cheers

3 REPLIES 3

diverhank
Authority

Are you sure it's not your safety shift feature that is doing it and ALO is just by coincidence? I'd suggest disabling all safety shift and try again to eliminate this possibility.

 

By the way, you do know that ALO is applicable to jpeg and not to RAW unless you are using DPP?

================================================
Diverhank's photos on Flickr

Thanks for the reply. It's not being caused from safety shift as I'm not maxing out the ISO. Does safety shift not only apply to Tv and Av mode?

I do know it just applies to JPEG. I generally just shoot RAW, but I wanted to test out ALO. That's when I noticed the changing shutter speed. It's really not a problem to me as I won't really be using ALO, but I'm rather curious if this is normal or not.

Doh...you're right no safety shift in M mode...my bad...

I have no clue...I don't use ALO.  I don't have the 1DX but on my 5DIII in M mode, I could've sworn I've seen the shutter speed flutter a few times...that's why I was so sure it was the safety shift feature...I only confirmed today that there's not supposed to be a safety shift in M.

 

I'll have to watch for this again...it might be something else because I don't use ALO.

================================================
Diverhank's photos on Flickr
Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.