08-09-2020 12:50 AM
Hi Guys,
Thought I'd run a problem by here before I took the camera into the shop for repairs.
I have a 5d Mark II with a relatively low shutter count, it's been working perfectly till today, when I noticed both the rear and top lcds have stopped working. Shutter still works, and the rear lcd seems to turn on, but is black and if it's on for a while will show a sort of 'matrix' of faint fine lines.
Has anyone experienced this kind of thing before? Seems weird that both displays stopped working at the same time. No liquid damage, no shock damage.
Cheers
08-10-2020 11:24 AM
The only thing you can do is a hard reset. If that doesn't work it needs service.
Remove "both' batteries for 30 minutes. Fully charge the main battery and buy a new clock battery. Install them and hold your head just so and stand on one leg and dance and cross your fingers perhaps you will get lucky.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.