cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

AF problems

EFFS
Contributor

I attached a Canon 500mm f 4.0 IS II lens to a Canon 1.4 III extender and attached this combination to a Canon -1D X.

Canon says this shouldn't be a problem. But there is a major autofocus problem. You need tp press the shutter again and again before it will focus. As soon as you move the focus point either further away or closer to the lens the autofocus doesn't work again. So it looks like the new 500 lens id not compatible with the 1.4 III extender.

 

There is no problem at all with my Canon 300mm f 2.8 IS lens.

 

has anyone noticed this problem too?

 

 

7 REPLIES 7

cicopo
Elite

I wish I had the gear to do the test but since I don't I'll suggest what I've read countless times. Use the center AF point only with the big gun because you're now at f5.6 which explains why you're not having the same issue with the 300 + TC which ends up at f4.

"A skill is developed through constant practice with a passion to improve, not bought."

Thank you for your comments.

 

I only used the center AF point from the start.

diverhank
Authority

Not sure if this was the cause in your case but you might want to check the menu AF:AF4 to see if the option "Lens Drive When AF impossible" is set to OFF or not. When set to OFF, if for some reasons the focus is out of range of the minimum focus distance (MFD)- either by your manually driving it or the AF driving it past...the AF stops working.  It will start working again only after you cycle the power.  This incredibly is per design.

 

I don't think it has to do with the extender per se...the extender will exacerbate the problem for sure since the MFD is changed for the worse.  Also, the 500mm lens plus extender belong in a different group as far as focusing is concerned versus your 300mm f/2.8...the AF for this combo is not as good which explains why you see it now and not before.

 

Even when the option above is set to ON, sometimes the AF does get confused and just sit there searching around a long time.  A quick power cycling and/or manual focus will solve the problem.  This happens to me from time to time (I use a 5DMk3 but it's the same thing) when I'm AI Servo tracking a bird in flight and it moves too close to me (closer than MFD) and stays there.  After that I usually have trouble focusing on anything else...it doesn't happen all the time but it does happen.

================================================
Diverhank's photos on Flickr

Thank you for your help.

 

The option ' Lens Drive When AF Impossible' is set to OFF.

 

I tested the lens/extender/camera a little bit more today. The AF works well if I (auto)focus on subjects near my initial subject I focused on. 

 

If I move the center AF point much further away from or much closer to this subject the AF really struggles for some time. I need to press the shutter time and time again before it suddenly  will focus.

You might want to set the option to ON and try to see if it's better but I think that it is normal what you're seeing.

================================================
Diverhank's photos on Flickr

A massive, massive thank you from me!

 

Switching the AF4 setting: Lens drive when AF impossible to ON did work!

The camera/extender/lens combination works like a dream now. No AF problems at all. AF is very quick!

 

Canon hasn't been able to help me, but you did help me a lot.

 

Thank you again!!

You're welcome Smiley LOL . Glad it worked out for you.

================================================
Diverhank's photos on Flickr
Announcements

2/07/2023: New product announcements!

EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.