cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

i80 and the new printhead

newbie1029
Apprentice

Hi there

I was gifted a used i80 printer and after trying to clear the printheads was having success  with only 2 of the colors. So I decided to buy a replacement printhead off of ebay for what seemed to be the going price of $20. Hoping it will do the trick but wanted to ask if that is likely to cure the problem. Got new cartridges wich I will be using.

2 REPLIES 2

shadowsports
Legend
Legend

Greetings,

Used equipment, maybe.

 

It's impossible for us to say with certainty what could, or if a new part would fix it.  

~Rick
Bay Area - CA


~R5 C (1.0.7.1) ~RF Trinity, ~RF 100 Macro, ~RF 100~400, ~RF 100~500, ~RF 200-800 +RF 1.4x TC, BG-R10, 430EX III-RT ~DxO PhotoLab Elite ~DaVinci Resolve ~ImageClass MF644Cdw/MF656Cdw ~Pixel 8 ~CarePaks Are Worth It

sfphoto
Contributor

Canon i80, has ink carts, appears ready to print but no go.

 

Upon starting:

1) carraige moves from far right to far left then settles into 'ready' position

2) paper is taken up / moves into position

3) yellow light flashes 3 times

 

Manual says 3 lights = paper jam but there is no paper in the mechanism other than the intake tray as described above.

 

Tried unpluggin for 1/2 hour then starting up - same issue.

 

Can not print a self test page by holding down the re-set because the yellow flashing light..

 

Assistance appreciated!

Avatar
Announcements