08-30-2020 09:41 PM
I recently installed my Canon Pixma TS202 Printer. When I turn the printer on, there is an orange light that flashes 4 times, stops, then keeps repeating. I do not know why that light flashes nor how to find out what the problem may be.
Any chance someone could help me, please?
Thank you!
09-27-2020 12:46 AM
My canon MG2922 printer is flashing both the orange and power light at the same time. Please what do I do to rectify the problem. And my printer does not print
10-07-2020 03:37 PM
Hi kemaksmetu,
For further information regarding the error light flashes that you are experiencing, please use the following link:
https://ugp01.c-ij.com/ij/webmanual/Manual/W/MG2900%20series/EN/UG/ug_trouble0300.html
If you are unable to resolve the error, it is recommended that you contact one of Canon's Technical Support Representatives via phone or chat. To contact a Technical Support Representative, please use the link below:
https://mycanon.usa.canon.com
10-07-2020 03:35 PM
Hi Catanne1,
The 4 flash error is an indication that there is a problem with the ink cartridges in your PIXMA TS202:
https://ugp01.c-ij.com/ij/webmanual/Manual/All/TS200%20series/EN/NTR/ntr_t_07_01_c.html
Please make sure that you have both the black and color ink cartridges installed in your printer.
Also, please remove the ink cartridges and make sure that the orange tape was removed from the bottom.
If the 4 flash error persists, it is recommended that you contact one of Canon's Technical Support Representatives via phone or chat. To contact a Technical Support Representative, please use the link below:
https://mycanon.usa.canon.com
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.