02-12-2013 12:19 PM
Can anyone give me list of PIXMA MG series or MX series printers which have a rear feeding paper tray
same as the MG5320 and MX892?
02-20-2013 08:12 PM
Hello robex,
We have a couple of PIXMA MX and MG series printers that have rear feeding paper trays similar to the PIXMA MG5320 and PIXMA MX892 -- the PIXMA MG8220 and PIXMA MX882. More information can be found on each of the printers here:
PIXMA MG8220
PIXMA MX882
http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mx_series/pixma_mx882
Hope this helps!
This didn't answer your question or issue? Find more help at Contact Us.
09-24-2013 11:00 AM
Hi Ramona,
Can you let me know which Canon printers offer a rear feed? The ones mentioned above are out of stock or discontinued. Thank you!
09-26-2013 11:01 AM
Hello.
Our MX892 also uses a rear tray. More information can be found at the following link:
For more information on our latest units, please contact us at 1-800-828-4040.
09-26-2013 11:37 AM
Unfortunately that printer (MX892) is out of stock. Are there any other printers available with a rear feeding tray? I have been a devoted canon customer for over a decade, and if you no longer offer anything with a rear tray I'm going to have to use another brand 😞
11-30-2013 08:16 PM - edited 11-30-2013 08:17 PM
I have had the same frustration; finding a canon all in one nice printer with a rear feed. is there anything out there?
Even one witha separate scanner
03-11-2014 01:19 PM
06-15-2014 06:37 AM
06-15-2014 06:36 AM
08-19-2014 11:59 AM
What did you end up with? I am in the same boat!
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.