cancel
Showing results for 
Search instead for 
Did you mean: 

Pixma Mg2922 error lights

angry_canon_guy
Apprentice

My late friend left a unused Pixma MG2922 to me. I down loaded the software to set up Windows 10 & tried to set up. Of course it's past the support period & I'm abt to tss it in alley!

 

The green on light & the amber alarm light alternately flash twice.  I checked the  paper jams, none. Put new ink cartridges in correctly & removed the protective tapes. I've turned it off unplugged it, clx any printing jobs, & the cartridges clicked into place. I've turned it on again & led's continue to flash.

 

Any suggestions?

3 REPLIES 3

Callistemon
Contributor

Two orange flashes separated by a long green flash means there is no paper in the tray that is selected. If there is paper, then the feed switch is probably set to the wrong source.

Thanks but the green on light flashes, then the amber light, then the green on light flashes & the amber light flashes.  Then the light remains on for a few seconds.  So to summarize green led, amber led, green led, amber led . 

 

Any suggestions?

That's a service call error. Try printing something from a computer so that an error code will display there.
Announcements
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/30/2022: Service Notice: EOS 70D: Error 70 or Error 80
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
03/16/2022: New firmware version 1.5.2 is available for EOS-R5
03/16/2022: New firmware version 1.5.2 is available for EOS-R6
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.1.1 is available for EOS-R3
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!
12/7/2021: New firmware version 1.3.0 is available for Mount Adapter EF-EOS R 0.71x
12/7/2021: New firmware version 1.1.1 is available for CR-N 300
12/7/2021: New firmware version 1.1.1 is available for CR-N 500
12/2/2021: New firmware version 1.1.0 is available for RF 70-200 F4 L IS USM