08-30-2016 08:22 AM
My printer was rest by my daughter because it was not printing, however after reset it turned off and we can't get it to turn back on. I have checked all the connections, outlets, and cords to make sure that they are connected and in working order. When we plug in the USB to the laptop it does not recognize the printer and I don't see it in our Device Manager. Is there a way to fix this? We are running Windows 7 on the laptop. Thank you for any help!
09-02-2016 01:10 PM - edited 09-02-2016 01:11 PM
Hello.
To try and resolve this issue, please unplug the power from the unit for about 25-30 minutes. Once this time frame has passed, plug the unit in directly to a wall outlet to see if the printer will power on.
If the issue persists, troubleshooting with our support group will be needed to narrow down the cause of your issue. Please contact our support group using the "Contact Us" link below for additional assistance.
This didn't answer your question or issue? Find more help at Contact Us.
09-07-2016 11:22 AM
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.