cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

MX922 won't actually print

LindaT49
Contributor

Earlier today the printer was working fine.  Then, I tried to print something else and it sucked up a piece of paper and chugged around like it was printing.  However, it spit out a blank page.  I tried printing the test pages and all the other things that would normally spit out something printed and paper went through the printer, but came out blank.

 

All my printer cartridges have a solid red light on them.  I've had the printer for almost exactly 1 year and this is the first big problem I've had with it.

 

I'm running win 7 and connecting to the printer via wifi from two different pcs.  Like I said, it was working fine earlier.  Now, no error messages, no nothing including actual printing.  The manuals don't seem to address this problem.  I've rebooted twice.  Once with the power switch and once by unplugging it.  Still nothing.

 

Any ideas/pointers?

 

LT

1 REPLY 1

LindaT49
Contributor
As an addendum - all the troubleshooting I've been doing is using up a lot of ink - that is not ending up on paper. I've replaced 2 ink cartridges since this started. I have no idea where it's going or if the software just thinks it's gone when it's not.
Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.