03-28-2018 02:03 PM
HI, Can anyone tell me how to remove the output tray on my MX722? It is broken and I have a second tray to swap out but can't figure out how to get the tray off the nit. Any photos would also be helpful or if ayone knows where i can get a guide or manual to proceed. Thanks
03-28-2018 02:46 PM
Hi there!
You might find THIS knowledge base article helpful.
If you find you need one-on-one assistance, our friendly support team is available at 1-800-OK-CANON (800-652-2666) weekdays from 10am to 10pm (ET).
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.