07-13-2013 03:24 PM
I have the MX892. I can't figure out how to get it to use the large black ink cartridge. Hence, the small black cartridge runs out often since all I print is black and white. Any ideas? Thanks, KB
07-15-2013 10:05 AM
Hello lkb1958.
Setting the unit to Grayscale mode may help use the large black tank and conserve the smaller dye based inks.
Also, check to make sure that your media type is set to plain, letter sized paper and that automatic duplex printing is not enabled.
If additional assistance is needed, feel free to call us at 1-800-OKCANON.
09-17-2013 11:02 PM
What worked for me was I had to goto Paper size - click US Letter then go over and click borderless
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.