02-24-2020 01:22 PM
Hello everyone who might have this problem of pages printing blank. Although I had done numerous nozzle check cleanings (which all the colors printed out perfectly), I didn't realize there should've been a black mesh design above the blue line on the printout.
I talked with a very kind (and patient) representative today and he suggested that I do a DEEP CLEANING. That did the trick. I've had my G4210 printer about 6 months and I don't do heavy printing, so if you have this problem and the black mesh design doesn't print in your nozzle check print, DO THE DEEP CLEANING! I have made a note in my printer folder so I have reference in case this happens again.
09/26/2023: New firmware updates are available.
CN-E45-135mm T 2.4 L F - Version 1.4.0
EOS 1DX Mark III - Version 1.8.0
EOS R6 Mark II - Version 1.2.0
08/18/2023: Canon EOS R5 C training series is released.
07/31/2023: New firmware updates are available.
05/31/2023: New firmware updates are available.
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
PowerShot Elph 360HS - Version 1.1.0.0
PowerShot SX420 IS - Version 1.1.0.0
PowerShot 620 HS - Version 1.1.0.0
PowerShot SX720 HS - Version 1.1.0.0
PowerShot G1X Mark III - Version 1.1.0.0
PowerShot G7X Mark II - Version 1.2.0.0
PowerShot G9X Mark II - Version 1.1.0.0
03/30/2023: New firmware updates are available.
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.