06-12-2019 04:18 PM
I keep getting a 1403 error "type of print head is incorrect" I am BEYOND frustrated. I changed the cartridges with CANON print cartridges that I paid a ridiculous amount of money for versus the cheap knock offs, and I'm STILL getting the error. Livid right now. I don't what to do, and the "users guide" is absolutely useless. Please help.
06-12-2019 04:20 PM
Just so you KNOW...I saw this post from 2012. I cannot "lift up the gray locking lever" because there is no "locking lever" on the side of the ink tank holder. Or, if there is--it's not accessable.
1. Open the cover of the printer.
2. Remove all ink tanks from the printer.
3. Lift up the gray locking lever on the side of the ink tank holder.
4. Gently remove the print head from the carriage unit.
5. Place the print head back in and lock the lever down.
6. Place all of the ink tanks back in the printer.
7. Close the cover and turn the printer off.
8. Unplug the power from the printer. Leave the power unplugged for about 5-10 minutes.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.