08-31-2013 07:22 AM
Recently I purchased a Canon IP90 printer from eBay. The printer is in very good condition, it has the optional battery and bluetooth module fitted, came in its original box with all the manuals and cd, spare cartridges etc. So, I really do want to try get this printer running because for me it fits my requirements perfectly.
It was described on the listing as it has been working perfectly upto when a error code appeared "waste ink absorber full".
Iv removed the waste ink pad, cleaned it and dryed it out and put it back in, I have also reset the waste ink counter.
The printer now does operate without indicating any faults, but when I send a document to print all I get it a blank page.
So far I have ruled out...
USB/Bluetooth - I first tried printing from USB, then switched over to a bluetooth connection. Still printing blank pages.
Drivers - I tried printing out a test page directly from the printer itself without any connection to the PC. Still getting blank pages
Ink - Replaced both black and color carts with new. Still no joy
Nozzle cleaning - I performed both Cleaning and Deep cleaning several times from the Canon software. No difference at all.
Checked carts and print head are secured into position correctly, and they are.
Manual Cleaning - I purchased a print head cleaning kit, gave the nozzles a good clean but still blank pages.
Could this mean the print head is dead? Cheapest I can find a replacement it £65 ($90-$100)
If people can assure me that these print heads have been known to fail then that would give me confidence to buy a replacement. I dont want to spend that much to find the printer will still not work.
Many thanks to all.
02-02-2016 07:22 PM
I am having the same problem, I have two of these, I swaped out the heads and they both work, what else can cause blank pages, inks are good and orginal inks. Heads are good, what the heck causes blank pages . I love this little machines.
02-04-2016 01:40 PM
Troubleshooting with our support group will be needed to narrow down the cause of your issues. Please contact our support group using the "Contact Us" link below for additional assistance.
This didn't answer your question or issue? Find more help at Contact Us.
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 184.108.40.206
PowerShot SX420 IS - Version 220.127.116.11
PowerShot 620 HS - Version 18.104.22.168
PowerShot SX720 HS - Version 22.214.171.124
PowerShot G1X Mark III - Version 126.96.36.199
PowerShot G7X Mark II - Version 188.8.131.52
PowerShot G9X Mark II - Version 184.108.40.206
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.