cancel
Showing results for 
Search instead for 
Did you mean: 

CANON MP 480 orange lamp on and printer not turning on

levitatestoo
Apprentice

I have tried to reset using the stop and power buttons--nothing. When i turn on the switch, it is green for one second and then unblinking orange. The LCD is not turning on and the USB connect to computer gives a message that printer is offline.

I have just changed the cartridges with genuine replacements. Please help me turn the printer on. thank you

1 REPLY 1

Michael
Product Expert
Product Expert

Hello.

 

Try unplugging the power from the unit for about a half hour.  Then plug the power back in and turn the unit on to see if the error clears and the display appears normally.

 

If the issue persists, please check your local listings for any repair shops that might be able to repair or examine the unit.

 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Announcements
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/30/2022: Service Notice: EOS 70D: Error 70 or Error 80
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
03/16/2022: New firmware version 1.5.2 is available for EOS-R5
03/16/2022: New firmware version 1.5.2 is available for EOS-R6
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.1.1 is available for EOS-R3
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!
12/7/2021: New firmware version 1.3.0 is available for Mount Adapter EF-EOS R 0.71x
12/7/2021: New firmware version 1.1.1 is available for CR-N 300
12/7/2021: New firmware version 1.1.1 is available for CR-N 500
12/2/2021: New firmware version 1.1.0 is available for RF 70-200 F4 L IS USM