To fix the B200 error, do the following:
1. Unplug power cord.
2. Lift printer door for cartridge.
3. Plug power cord, then press power button.
4. Watch the printer cartridge to start moving.
5. When you see the printer cartridge moving from right to left, immediately close the printer door.
6. Wait until you see, either an ink printer error or back to normal mode.
7. If you see printer ink error, press and hold the STOP red button for about 7 to 10 seconds until you see the screen in normal mode.
Walah!!!!! You got your printer back!!!!
Do this every time you have your power cord unplugged or power outages.
Good Luck. I hope this helps!!!!
