08-16-2019 11:54 AM
Hello,
Hello to everyone. New to forum and 2nd. post. I have a PowerShot SX30 IS that I am trying to hook up to my new Laptop running Windows 10 and no CD Rom. Formally set up on a Windows 7 laptop. I went to Canon and downloaded the only driver that was there, then ran it but I cannot find it on the computer. I tried again and it says it is already installed. I need Zoom Browser etc.
Can anyone help?
Thanks
Solved! Go to Solution.
08-16-2019 01:46 PM
Hi there Sporty, is your camera registered on Canon? I believe you have to register it first with the serial number and then you will have access to all the software versions including Windows 10 and any firmware updates.
08-16-2019 01:46 PM
Hi there Sporty, is your camera registered on Canon? I believe you have to register it first with the serial number and then you will have access to all the software versions including Windows 10 and any firmware updates.
08-16-2019 02:45 PM
08-16-2019 03:35 PM
You're welcome!
07/01/2024: New firmware updates are available.
06/06/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.4.0
Speedlite EL-5 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.