12-23-2020 09:32 PM - edited 12-23-2020 09:34 PM
Anyone have issue use LAN with WFT-7A or WFT-4A on EOS Utility 3.13.10 (WIN 10) remote shooting. It was work on 3.12.30. After upgrade to 3.13.10, I can't pair to WFT on LAN, WIFI still enable pair and remote shoot. I reinstall 3.12.30. it work again.
12-24-2020 08:22 AM
WFT-E4 or E7. Older hardware at this point, although I noted that support for the EOS R was added in the latest firmware update. Updating the firmware (if applicable) could help, but I wouldn't bother if it works under 3.12.30. I'd stick with that.
EOS Utility updates are usually provided to add support for newer cameras. You don't need the latest version for your 5D3.
Bay Area - CA
~R5 C (188.8.131.52) ~RF Trinity, ~RF 100~400, ~RF 100~500, +RF 1.4x TC, +Canon Control Ring~6D2 (v1.1.1) Retiring ~EF Trinity, others ~DxO PhotoLab Elite ~Windows10/11 Pro ~EVGA RTX 3080Ti FTW3 Ultra ~ImageClass MF644Cdw ~Pixel6 ~CarePaks Are Worth It
12-24-2020 09:03 AM
I believe it is bug on new version EOS Utility. I am use 5D4 and 7D2 on WFT-E7A NOW. both cameras are the latest firmware. And WFT-E7A on lastest firmware too. I plan run on R later. Then swith to R5 with WFT-R10 My job is special request LAN connected to camera on remote site.
Anyone test on WFT-E8, E9 and R10 LAN port on EOS Utility 3.13.xx version? It may have same issue.
If Canon don't try fix the issue. I may find other soultion. example USB over IP. WFT-E7 still runing USB 2 speed, not good for RAW file.
12-24-2020 09:50 AM
There are only user forums, not Canon Support. I suggest that you contact Canon Support directly regarding your issue.
03/02/2023: New Firmware Updates Are Available:EOS R7 - Version 1.3.0EOS R10 - Version 1.3.0
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.