05-03-2020 03:05 AM
Just built a new computer, (Windows 10 Pro, Ryzen 9 3900x, 64gb of ram) downloaded the newest version of Canon utilities from the Canon 5D MK IV Drivers and Downloads page, and when I connect the camera via USB it says no camera connected, although it will let me connect over wifi, but the download speeds on that seemed pretty slow, like 2 minutes per image. I have been using Canon cameras and Canon Utility to download, since the 40D in 2009. Any suggestions or insight would be greatly appreciated.
05-03-2020 07:18 AM
I suggest that you take a look at the "Supporting Documents" associated with the Canon Utilities.
Canon appears to specify Intel Core.chipsets and NVidia graphics hardware exclusively.
05-25-2020 01:17 PM
Honestly it's embarrassing that Canon doesn't support AMD-based systems in 2020.
05-03-2020 02:52 PM
is your cameras wifi active when you connect?
i have a 70D with the wifi active it will not do anything with the usb port. i have to turn it off in the camera.
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 184.108.40.206
PowerShot SX420 IS - Version 220.127.116.11
PowerShot 620 HS - Version 18.104.22.168
PowerShot SX720 HS - Version 22.214.171.124
PowerShot G1X Mark III - Version 126.96.36.199
PowerShot G7X Mark II - Version 188.8.131.52
PowerShot G9X Mark II - Version 184.108.40.206
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.