cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Anyone using ACDSee Ultimate 2019 with G7X Camera

Dave35009
Apprentice

BACKGROUND: Using G7X & 7D Cameras

                            Take all images in RAW

                            Using ACDSee 2019 as my editing software

 

When I import all images from both cameras (in RAW) all images are as they should be. However, when I have completed all my editing and I complete a batch conversion to jpeg the images from the 7D are as they should be. However, the G7X images have become barrelled. Thoughts?

1 ACCEPTED SOLUTION

Yes, obvious barrel distortion. No corrections are being applied when I import the RAW images. However, I was playing around with the settings in ACDSee yesterday and have been able to set up a batch distortion correction and it seems to be working well.

View solution in original post

2 REPLIES 2

BurnUnit
Whiz

Do you mean the images are showing obvious barrel distortion? Is ACDSee automatically applying or not applying some filter or distortion correction that you're not aware of?

Yes, obvious barrel distortion. No corrections are being applied when I import the RAW images. However, I was playing around with the settings in ACDSee yesterday and have been able to set up a batch distortion correction and it seems to be working well.

Announcements
09/19/2022: New firmware version 1.0.4.1 is available for EOS C70
08/31/2022: New firmware version 1.1.1 is available forRF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!