09-25-2019 03:30 PM
BACKGROUND: Using G7X & 7D Cameras
Take all images in RAW
Using ACDSee 2019 as my editing software
When I import all images from both cameras (in RAW) all images are as they should be. However, when I have completed all my editing and I complete a batch conversion to jpeg the images from the 7D are as they should be. However, the G7X images have become barrelled. Thoughts?
Solved! Go to Solution.
09-26-2019 02:50 PM
Yes, obvious barrel distortion. No corrections are being applied when I import the RAW images. However, I was playing around with the settings in ACDSee yesterday and have been able to set up a batch distortion correction and it seems to be working well.
09-26-2019 09:41 AM
Do you mean the images are showing obvious barrel distortion? Is ACDSee automatically applying or not applying some filter or distortion correction that you're not aware of?
09-26-2019 02:50 PM
Yes, obvious barrel distortion. No corrections are being applied when I import the RAW images. However, I was playing around with the settings in ACDSee yesterday and have been able to set up a batch distortion correction and it seems to be working well.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.