10-29-2024 10:07 AM
I just bought a polarizing filter for my R7 kit lens. Are there special settings in the camera that I need in order to get it to work? As I rotate it, I can see the sky getting bluer through the viewer, but then it seems like the camera compensates, and the sky goes back to being washed out. I have it set to Spot Metering and AWB.
Solved! Go to Solution.
10-29-2024 10:37 AM
If you are just seeing this in the viewfinder, you might want to turn Exposure Sim off.
10-29-2024 10:25 AM
You probably need to have something else in the shot, and use evaluative metering. Also, don't use too wide of a lens.
10-29-2024 10:34 AM
Thanks. It was a landscape with both sky (1/3) and trees. I was using from 18-35mm. I will try evaluative metering.
10-29-2024 10:37 AM
If you are just seeing this in the viewfinder, you might want to turn Exposure Sim off.
10-29-2024 11:03 AM
For best results with a CPL filter, you want to remove it so that you can accurately set up your exposure and lock focus.
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.