cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Power Pinout for Optura 200 MC

mula
Contributor

I have a bunch of DV tapes and I want to get the recordings on my computer. I still have the camcorder Optura 200 MC. Unfortunately, I only have one power cable that has a 3 pin female connector that goes into the camcorder and a 'regular' connector on the other side which has a contact on the outside and another 1 or 2 contacts on the inside. I beeped it out and the outter contact goes to the left of the 3-pin connector (with the notch towards me). The contact inside goes to the right of the 3-pin connector. So I think the left and right pin are ground and 9.5V. But I don't know which one is which. I also didn't get anything for the middle pin. Does anybody know what the pinout is?

2 REPLIES 2

shadowsports
Elite

OEM is CA-560.  CA-570/570S also works.  Buy a replacement, use an ohms meter, but don't guess.  

~Rick
Bay Area - CA
~R5C (1.0.1.1) ~Many Lenses ~DxO PhotoLab Elite ~Windows10 Pro ~EVGA RTX 3080Ti FTW3 Ultra
~ImageClass MF644Cdw ~Pixel6 
~6D2 (v1.1.1) retiring

Thanks for the response. It actually turns out the pinout is printed on the connector. It's kind of hard to see but below is an image where it can be seen well. In the image the notch is at the top so negative is on the left and positive on the right. I wired it up this way but the camera didn't turn on. 

There is also a USB port on the front protected by a cover. Next to the USB port there is and LED that say charge. I plugged a USB cable in there. Should the LED come on when a USB cable is plugged in the USB port (the battery is inserted but it might be dead after so many years)? 

 

 

connector.jpg

Announcements
09/19/2022: New firmware version 1.0.4.1 is available for EOS C70
08/31/2022: New firmware version 1.1.1 is available forRF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!