06-24-2019 09:29 AM
Hello, my HF G40 sends out a evenly spaced audio beep when I connect my COMICA external microphone. What should I do? Get another microphone or configuring the camera?
Thanks for any help at all.
06-25-2019 03:39 AM - edited 06-25-2019 03:47 AM
As far as I can tell, Comica mics are powered from the device they are connected to and do not have a battery on board. The G40 manual states on page 79 that to use a non Canon external mic, the mic needs to be self powered, ie it has its own internal battery.
I suspect this is the cause. So you will need to purchase a self powered mic. There are quite a few available.
06-25-2019 06:45 AM
Thank You for your suggestions.
I check the camera manual and got a way to make it work with the Comica self powered microphone to avoid the wind noises while outside. The next step is to connect the TASCAM DR-05.
Thanks again
Manuel Martins
03/18/2025: New firmware updates are available.
EOS R5 Mark II - Version 1.0.3
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
09/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.