Canon Community

Nightfae · 05-19-2025

I recently bought a Canon R5 MK 2 which I mainly use in studio with a tethered setup. The camera is tethered via a TetherTools USB-C to USB-C cable to a M2 MacBook Pro using Lightroom Classic. Currently (05/2025) the camera is not appearing in the su...

Nightfae · 05-22-2025

After getting my hands on a Canon DR-E6P dummy battery adapter, I can confirm that the issue seems to be cause by the camera deciding to charge the battery instead of tethering.If the dummy battery is used, the USB-C to USB-C cable can be used withou...

Nightfae · 05-22-2025

That is pretty much the same that my adapter does. However, that is a pretty shabby workaround.

Nightfae · 05-22-2025

My problem is not that charging is not working. My problem is that tethering is not working fine. The problem persists with a bunch of different cables that I tried, although all of then were able to do power delivery.

Nightfae · 02-13-2025

Unfortunately, now even after a firmware update in 2024, the problem persists. The printer will occasionally hang when printing multiple images. On cycling power on the printer, the the printing will resume with the next image. SOmetimes after 1 - so...

Nightfae · 02-25-2024

I could solve the issue ok-ish for me. The problem seesm to occur when chosing the paper definition of Hahnemühle PhotoRag Baryta. The thickness of the paper forces you to use the manual feed. The problem ONLY occurs on the manual feed. If I instead ...

Canon Community

User Statistics

User Activity

Flaky Tethering with EOS R5 Mark II

Re: Flaky Tethering with EOS R5 Mark II

Re: Flaky Tethering with EOS R5 Mark II

Re: Flaky Tethering with EOS R5 Mark II

Re: Selphy cp1300 firmware bugs suspected

Re: imagePROGRAF PRO-1000 Leaves Light Band at end of Page