08-28-2016 08:20 PM
When I go to scangear, advanced mode, preferences, scan and try to select "enable large image scans" I cannot, because it is greyed out. What am I missing?
Solved! Go to Solution.
08-30-2016 12:14 PM
Hello.
This would have to be enabled from the IJ Scan Utilty. Please perform the following:
1. Open the IJ Scan Utility.
2. Click Settings.
3. Click the Scangear tab on the left.
4. Check the box to enable large scans.
Once this has been done, click OK.
This didn't answer your question or issue? Find more help at Contact Us.
08-30-2016 12:14 PM
Hello.
This would have to be enabled from the IJ Scan Utilty. Please perform the following:
1. Open the IJ Scan Utility.
2. Click Settings.
3. Click the Scangear tab on the left.
4. Check the box to enable large scans.
Once this has been done, click OK.
This didn't answer your question or issue? Find more help at Contact Us.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.