04-14-2015 09:19 AM
I have a FiOS (Actiontec) router (SSID say AB) and a bridge (SSID say AB-5G). All the devices seamlessly
work with this setup except for my MX860 printer.
The MX860 is configured to be able to print wirelesslessly and I can see the printer from the router and can
ping it. It has a static IP address assigned to it.
When a print job is submitted from WiFi network AB to the MX860, I get connection error 300 and the job
does not print. When I switch the WiFi network on my Mac (and other Macs on the network) to AB-5G
the print job resumes and prints.
Security is WPA2 as verified on the router as well as on the MX860 WLAN setting list.
(Somewhere, I heard a Canon rep respond to a post that if this is an urgent request, the consumer
should contact Canon support. I think you are a decade behind with your support model and don't
really understand where the consumer / retail product model has moved.)
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.