cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Canon MF8350Cdw - can I make it be able to airprint?

hodgy03038
Contributor

There must be some way to make this wireless printer able to be able to airprint. Please help.

6 REPLIES 6

Darius
Whiz

Hi hodgy03038.

 

The imageCLASS MF8350 suffix is Cdn; it is capable of wired network connectivity, but not WiFi.

 

Airprint drivers and protocols are developed and distributed by Mac OS; for help with Airprint installations, you will need to refer to Apple Support (non-Canon link: https://support.apple.com)

 

Canon-produced drivers for Mac OS may be found on the MF8350Cdn Drivers & Downloads page.  Once the drivers are installed, add the printer using the Canon-produced drivers.  If the printer does not show up, double-check the printer's and computer's connectivity, and ensure the router is allowing the two devices to communicate.  You may need to register the printer to the computer using the printer's IP Address.

 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

No sir that is incorrect. It is a CDw and I currently use it wirelessley from my computers. That being said, how can we make it able to use with AIRPRINT???

Hi! Darius is correct that the proper name for this printer is the imageCLASS MF8350Cdn. The "n" stands for "network," which refers to a printer that can work on a wired LAN. Canon USA has not marketed a version of this printer bearing the "Cdw" suffix where the "w" would signify wireless networking capabilities and there is no other supported model in our laser printer lineup with the number "8350" in its name.


We recommend that you double-check your printer's model number as it's possible that you might indeed have a wireless-capable printer but with a different set of numerals in its model number.


Hope this helps!

Sorry, my mistake it is MF8380Cdw.

 

Can this work with airprint?

Hi hodgy03038.

 

The MF8380Cdw is not an Airprinter, thus Mac OS generic drivers (Airprint/Bonjour) may not work for it. You will need to use the Canon-produced drivers on Mac OS.

 

In order for the MF8380Cdw to work across a wireless or wired network connection, it will need to be connected to the same network, and allowed by the router/modem/network-switch to communicate.

 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

No not really. I can print to all computers but by AIRPRINT I MEAN print from an Iphone or ipad.

 

 

Announcements
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
10/14/2022: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
09/19/2022: New firmware version 1.0.4.1 is available for EOS C70
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!