Canon Community Canon Community
 


Reply
New Contributor
Posts: 1
Registered: ‎01-12-2020

TS8350 closing the operation panel

This has been asked before for some other models, but I found no official answer anywhere.

So: Do I really have to close the operation panel manually after powering off my TS8350? The tray is retracted automatically and the operation tray opens automatically when I print, but it also stays open after the device has switched itself off.

I wouldn't have an issue closing the panel manually, if there wasn't a noticeable resistance in the hinges. It feels like I'm going to break the thing in the long run. Leaving it open is an option ofc, but I'd rather not get dust inside the printer.

New Contributor
Posts: 1
Registered: ‎06-19-2021

Re: TS8350 closing the operation panel

I've been searching for this answer too, and have found limited info. The absence of a paper manual makes it even harder to find. However I eventually found this Canon help YouTube video which suggests for a similar model the answer is: yes you have to push it down. It seems very odd to me as there's so much friction, it feels like you're forcing it to drop, and almost like it's going to break it. https://youtu.be/IG73w3wAwZ8
powered by Lithium

LIKE US on Facebook FOLLOW US on Twitter WATCH US on YouTube CONNECT WITH US on Linkedin WATCH US on Vimeo FOLLOW US on Instagram SHOP CANON at the Canon Online Store
© Canon U.S.A., Inc.   |    Terms of Use   |    Privacy Statement