08-06-2016 01:03 PM - edited 08-06-2016 01:45 PM
Screen much darker than normal unless I squeeze case with thumb on right back and index over CANON logo right front...then it works normally. Any possible DYI fix? I put a squeeze clamp on it with some hard plastic nuts to concentrate the force and it worked normally. Then when I removed the clamp it continued working. At least for the short term.
06/06/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.4.0
Speedlite EL-5 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.