11-13-2023
09:22 AM
- last edited on
11-14-2023
08:47 AM
by
Danny
I have a canon sx410is for 6 years now. I have a problem with the camera for more than 1 month now.Afrer i click photos with the camera the photos become completely white whether I zoom in or out.
11-13-2023 09:32 AM
Do they appear OK on the screen before you take the image?
11-13-2023 10:08 AM
Yes
11-13-2023 10:11 AM
Sounds like a bad aperture in the lens or bad control of shutter speed. If you have a manual mode, program a wide open shutter and fast shutter speed and see if that helps.
11-13-2023 10:16 AM
Didn't work
11-13-2023 10:47 AM
Since you don't have a manual mode, I am not sure what you did.
You can try to reset the camera:
And shoot in Auto mode again, but if that does not work, the camera needs to be repaired.
11-13-2023 11:12 AM
Thanks, but it didn’t work either i may have take it to the repairing shop.
12/18/2025: New firmware updates are available.
11/20/2025: New firmware updates are available.
EOS R5 Mark II - Version 1.2.0
PowerShot G7 X Mark III - Version 1.4.0
PowerShot SX740 HS - Version 1.0.2
10/15/2025: New firmware updates are available.
Speedlite EL-5 - Version 1.2.0
Speedlite EL-1 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.2.0
7/17/2025: New firmware updates are available.
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.