12-05-2012 02:09 PM - edited 12-05-2012 02:11 PM
In order to minimize errors due to memory card failures, I am curious whether or not Canon recommends:
Formatting cards in the camera or on a computer?
Deleting images or formatting the card after a shoot?
Some models include a "Low level format" Is this really ever needed?
12-05-2012 02:27 PM
12-05-2012 05:39 PM
Way back when digital started becoming popular I took a 2 day seminar put on by Olympus. At that time we were instructed to ALWAYS format in camera because some computers were using FAT 16 while others used FAT 32 as the filing system but the cameras of the day used FAT 16. As things progressed pretty much all operating systems (PC based) went to FAT 32 & so did the cameras. I've formated countless times on the PC since buying my 20D when they first became available without any problems. One primary reason to do that years ago (may have changed since) was that if you used a card in 2 or more cameras it would change the shutter count on the camera it the card had higher file numbers..
When I'm going to travel I format all my cards on my computer, use my email address as the volume label (it's short enough to do that) & add a photo of my business card so that IF I loose a card or camera it's possible for the finder to contact me. There isn't much chance a thief would return them but I'm a diver & cameras are often lost while diving & because I dive in a very popular spot the chances of my dive camera being recovered are good.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.