Canon Community Canon Community
 


Reply
New Contributor
Posts: 2
Registered: ‎05-19-2016

A different lens needed for MS-800?

I have an MS-800 and have the GZ X14-X30 lens.  what I want to display on the screen and be able to scan into the computer are blueprints.  With the lens I have I can only see part of the blueprint.  Is another lens needed to see the entire blueprint but still be able to zoom in?

 

Also I am using the 100R Auto Carrier.  And manuals for this?  I have it plugged into the side of the MS800 but appears to do nothing.

Highlighted
New Contributor
Posts: 2
Registered: ‎05-19-2016

Odd problem with the MS800

I have an MS800 with the Auto Carrier 100R.  As it turns out that I have to put tension on both reels in order to get a decent picture.  Otherwise I can't zoom in or focus on the microfilm.  Any ideas/

Moderator
Posts: 1,605
Registered: ‎07-08-2013

Re: A different lens needed for MS-800?

Hi, Scott88! Thanks for posting!

While our forum community members are welcome to chime in, Canon does not provide direct support for microfilm scanners. Instead, your dealer will be able to help you! If you don't have a dealer, please call us at 1-800-OK-CANON (1-800-652-2666) and we will be happy to provide you with the names of dealers in your area!

We hope this helps!

powered by Lithium

LIKE US on Facebook FOLLOW US on Twitter WATCH US on YouTube CONNECT WITH US on Linkedin WATCH US on Vimeo FOLLOW US on Instagram SHOP CANON at the Canon Online Store
© Canon U.S.A., Inc.   |    Terms of Use   |    Privacy Statement