04-26-2014 06:36 PM
I've had my 70D for about 6 months, with no problems... up until yesterday, when I pushed the shutter button halfway, the LCD monitor would display the "Quick control" menu for 3-4 seconds... this feature has disappeared... I can push the "Q" button, & get the same thing... but this is inconvenient... I can toggle this display "ON" continuously, thru the "info" button; but I don't want that... I even restored factory settings, after putting in a fresh battery... I can't get this feature back..??
Solved! Go to Solution.
04-28-2014 06:14 PM
Hello Robiss,
Based on the information you've provided, it may be best to have our factory service center evaluate your camera.
You may set up service through our web site, here.
04-26-2014 06:46 PM
also.... I tried the "LCD off/on btn" set in both positions... it seems like the shutter button option should do it... but there appears to be no difference between the 2 settings..??
04-28-2014 06:14 PM
Hello Robiss,
Based on the information you've provided, it may be best to have our factory service center evaluate your camera.
You may set up service through our web site, here.
04-29-2014 07:10 AM
04-28-2014 08:06 PM - edited 04-28-2014 08:08 PM
I don't understand why anyone would want the Quick menu to display for a few seconds every time they half pressed the shutter release button... i.e. right before each shot taken. Can you explain why anyone would want that?
My 7Ds don't do that. And I don't want them to. It would be distracting and intrusive to have the menu pop up on the screen right below my eye at teh viewfinder every time I start to shoot. I think some of the Rebel series cameras do something similar (though it can be shut off). It would also drain the batteries a lot faster, lighting up the LCD prior to every shot (I also turn off automatic image playback... to save battery charge.... I can always call up the last image taken easily).
You mention restoring factory settings, but did you also try restoring the Custom Functions? Maybe that would fix it. Or maybe you had something enabled, that made possible the constant display.
I do use the Q button at times to call up the Quick menu on my 7Ds, to check or change a setting. But more often I just use the top LCD display or readout in the viewfinder, both of which show a lot of the same info.
***********
Alan Myers
San Jose, Calif., USA
"Walk softly and carry a big lens."
GEAR: 5DII, 7D(x2), 50D(x3), some other cameras, various lenses & accessories
FLICKR & PRINTROOM
04-29-2014 07:19 AM
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.