04-07-2014 10:54 AM
I have a Canon 70D which is being used as a Photobooth. There is no software used. The Camera is connected to a LCD via HDMI for live view and the photos are clicked using a remote.
The connection is good over HDMI and the photos are being clicked too. The problem is loss of HDMI signal. After clicking 5-6 photos, the LCD signal goes off and comes back only if the photo is clicked again or if we press the live preview switch on the camera. Sometimes, the signal looses after single shot also.
I have checked the quality of the HDMI cable and it is very good. The camera and LCD are connected by Adapters and no battery is being used, so there is no chance of power being turned off.
Please let me know what is the solution for this.
Thanks,
Girish
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.