Showing results for 
Show  only  | Search instead for 
Did you mean: 

New M50 keeps freezing/dying. Support says it's humidity?




I bought a new EOS M50 at the beginning of June 2020. For a few weeks, it was working well but suddenly it seemed

develop a problem. After shooting some pictures (usually about 40-50), it suddenly becomes completely unresponsible. At times, the image freezes on the touchscreen and even powering off the camera doesn't work. I have to remove the battery. When I reinsert the battery, the camera won't power on. I have a spare battery and sometimes putting it in brings the camera back to life but most of the time, the camera is unresponsive for several hours until I bring it home and charge the battery then reinsert it.


It's never been a case of the battery being run down as I've only taken 40-50 pictures before the camera freezes. There are never any error messages, codes, etc.; the camera simply freezes then stops working as described above. This has always happened with the 15-45 kit lens installed. I've tried removing the battery for a couple of days and then resetting the camera to defaults.


After this happened several times during vacation trips when I really wanted to take nice pics and ended up having to use my phone camera, I called Canon Canada support. The lady I spoke with immediately told me it's most probably due to high humidity and recommended removing the battery for 48 hours then resetting the camera. She seemed surprised that I saw no error messages and then said if her suggestion didn't work I could send it for service. I tried her suggestion and the camera seemed fine for about 70 pictures but then it again stopped working with the same behavior: picture freezing onscreen, unable to power off until I remove the battery, no response with battery reinsertion or another battery. Four hours later upon returning home, inserting battery brings the camera back to life.


As you can imagine this is very frustrating, especially since these are often vacation pictures taken during short trips to scenic areas. I've been searching the internet for similar stories but no one seems to have the same issue. The camera i still under warranty so I can pack it up and send it to Canon but due to the pandemic and their service being closed from March to July, they have a backlog of repairs so it will likely be awhile before I get it back. So I thought I'd join the forum here and see if anyone else had the same problem and found a solution. 


Product Expert
Product Expert

Hi there,


It sounds like the best option would be to send the camera for service with a copy of your proof of purchase for warranty consideration. If they find an issue they will be able to take care of it for you and if they don't then that may mean that humidity was indeed the cause. Better to have it checked out soon than to keep missing opportunities to use your new camera.

03/14/2023: New firmware version 1.8.1 is available for EOS R6

03/02/2023: New Firmware Updates Are Available:

EOS R7 - Version 1.3.0EOS R10 - Version 1.3.0
02/24/2023: We've updated Share Your Photos

2/07/2023: New product announcements!

EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version is available for EOS-C500 Mark II
05/26/2022: New firmware version is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version is available for EOS R5 C
03/23/2022: New firmware version is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.