cancel
Showing results for 
Search instead for 
Did you mean: 

Good Boom Mic for M50

jamesT2020
Apprentice

Hi Guys,

 

I was wondering if anyone could recommend a good microphone to go on the end of a boom and use with my M50. I would like it to have low noise level but good pick up of speach. I have on at the moment that requires me to set the manual record level quite high for it to pick up and this of course picks up a lot of background noise and hissing.

 

I can remove the hissing in my edit software but sadly that also removes a lot of the speach or drops in and out with the speach.

 

So I want one that I can connect on the end of my boom to my xlr - 3.5mm cable that works well.

 

If any one can suggest some that wont break the bank that would be most appreciated.

 

Thanks

 

James

1 REPLY 1

srd-software
Contributor

It might not be suitable for your application but would a wireless lavalier work? 

Announcements
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
03/22/2022: New firmware version 1.2.0 is available for PowerShot PICK
03/16/2022: New firmware version 1.5.2 is available for EOS-R5
03/16/2022: New firmware version 1.5.2 is available for EOS-R6
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.1.1 is available for EOS-R3
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!
12/7/2021: New firmware version 1.3.0 is available for Mount Adapter EF-EOS R 0.71x
12/7/2021: New firmware version 1.1.1 is available for CR-N 300
12/7/2021: New firmware version 1.1.1 is available for CR-N 500
12/2/2021: New firmware version 1.1.0 is available for RF 70-200 F4 L IS USM