cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Firmware Version EOS Rebel T3

miker_canon
Apprentice

Hello

 

I have owned an EOS Rebel T3 (not i) for quite a few years and have recently been trying to update the firmware but have encountered a problem that has baffled me (perhaps it's me!).

 

When I follow the clear instructions on the Canon site, I stop at the point where it references "Firmware Ver" b/c there is no item on the Menu list (right hand wrench)

 

Can one, in fact, update the FW on a T3 or only a T3i? The Canon support site suggests that this is possible at the document header line, but only references the T3i in the body of the document ...

https://support.usa.canon.com/kb/index?page=content&id=ART114180

 

Any help would be appreciated 🙂

Thank you

Mike R

 

 

 

 

 

1 ACCEPTED SOLUTION

kvbarkley
VIP

You might have to have the camera in one of the "creative" modes: PAS or M, some menu items are limited in automatic modes like green square.

View solution in original post

2 REPLIES 2

kvbarkley
VIP

You might have to have the camera in one of the "creative" modes: PAS or M, some menu items are limited in automatic modes like green square.

Thank you so much - that was indeed the answer. I can now update the firmware
🙂
Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.