cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Error 02 on 5D mk ii when importing to mac but not pc?

morvi
Apprentice

Hi guys

 

I am having an issue with importing. I do a lot of youtube videos and use my 5D as a face cam (Over kill i know but o well). Previously i would just plug my camera into my mac and start to import the videos until one day I kept getting a "Error 02" message. After it began to appear half way through an import, it started happening almost instantainiously. 

 

I have tried the same method on my PC and it seems to work fine. I have got 1 error message but then it imported fine afterwards. 

 

I edit on my videos on my mac so at the moment I am having to import them onto my pc and then upload them to a cloud to then download them on my mac. This is a very long and tedious process as one of my videos will be 20gb+ so it is taking the majority of a day to bring them across.

 

Has anyone found a way around this error as I have searched google but no one seems to have a fix.

 

I use a link up cable to plug my camera into my mac/pc and have tried various programs such as

EOS Utility

Photo

Icapture

 

I get the same results no matter what program I use.

 

1 REPLY 1

Waddizzle
Legend

@morvi wrote:

Hi guys

 

I am having an issue with importing. I do a lot of youtube videos and use my 5D as a face cam (Over kill i know but o well). Previously i would just plug my camera into my mac and start to import the videos until one day I kept getting a "Error 02" message. After it began to appear half way through an import, it started happening almost instantainiously. 

 

I have tried the same method on my PC and it seems to work fine. I have got 1 error message but then it imported fine afterwards. 

 

I edit on my videos on my mac so at the moment I am having to import them onto my pc and then upload them to a cloud to then download them on my mac. This is a very long and tedious process as one of my videos will be 20gb+ so it is taking the majority of a day to bring them across.

 

Has anyone found a way around this error as I have searched google but no one seems to have a fix.

 

I use a link up cable to plug my camera into my mac/pc and have tried various programs such as

EOS Utility

Photo

Icapture

 

I get the same results no matter what program I use.

 


Card reader.

--------------------------------------------------------
"The right mouse button is your friend."
Announcements
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
10/14/2022: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
09/19/2022: New firmware version 1.0.4.1 is available for EOS C70
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!