07-29-2023
02:07 PM
- last edited on
07-29-2023
02:30 PM
by
Danny
Hi,
I use my EL-1 on camera and I am getting blurry pictures... my shutter speed is 500.
07-29-2023 02:26 PM
Are you taking pictures in low light or low contrast situations. If so the camera may be UNABLE to lock focus that's why the camera has a built in LED AF Assist Beam. But when a speedlite is being and the ambient brightness is low. The speedlite will assist the camera's AF system using Intermittent Flash Firing the "IR (Infrared)" (not really IR just a red grid pattern) AF Assist Beam DOES NOT WORK ON ANY mirrorless camera system. Please post some pictures in the forum. What lens are you using. What settings are you using ISO & Aperture. You only listed a shutter speed.
07-29-2023 02:42 PM
Can you post an image along with what your camera settings were?
Since 1/500s is faster than the sync speed, assuming you had high-speed-sync enabled. Does the metadata for the captured image show it was indeed take with 1/500s?
07/01/2024: New firmware updates are available.
06/06/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.4.0
Speedlite EL-5 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.