11-20-2024 08:41 PM - last edited on 11-20-2024 10:36 PM by Tiffany
I was taking photos just fine earlier today. I turned the camera off, detached everything and put all the covers on, and put it up. I then come back a few hours later and when I turn it on, nothing happens. The screen itself itself won’t turn on but viewfinder is fine and it displays information when looking through the lens. But won’t take photos or bring up anything at all on the main camera screen itself. I also have already made sure the battery is fully charged.
11-20-2024 10:09 PM
Hi and welcome to the forum:
Just to check that we have missed nothing... have you pressed the DISP button a couple of times to make sure you have not inadvertently set it to a blank screen?
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.