08-14-2024 01:17 PM
I've set High ISO speed NR to OFF in my R6II, but it's still applying noise reduction to both straight-out-of-camera JPEGs and RAWs in DPP. The noise reduction is clearly visible on the JPEGs, and when a RAW is opened in DPP the shot settings display non-zero values for both Reduce luminance noise and Reduce chrominance noise.
What am I missing?
08-16-2024 03:34 PM
SOOC JPEG has luminance NR applied too. You can see it by turning it off completely in DPP and comparing.
There seems to be a base level of noise reduction (both luminance and chrominance) that cannot be disabled in camera, even with all NR settings turned off. Even DPP reflects this with the RAW: with NR turned off in camera, the as-shot reduce luminance and chrominance noise values are 7.6 each. Lower than with NR set to "low" in camera which has them at 8.0, but definitely not 0!
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.