06-06-2017
08:15 PM
- last edited on
06-07-2017
11:46 AM
by
Danny
I am trying ro record an event at my church. I want to have the audio through the mixer go into my camera mic input. My church has a Yamaha MG12XU Mixer. I have a Canon EOS 60D. I was wondering if I could use XLR female to Aux adapter [link removed per forum guidelines] and plug it into the audio output (the speaker output) on the Mixer. I want to record the event through my camera and have the audio come through the microphones which then go through the mixer and go to the Camera. I know that I can blow the camera so I need to know what to buy so a lot of energy doesnt go through the camera and break it. I need to know what type of resistor to buy or something that can decrease the energy. I need to know by this Sunday. Thank you.
Solved! Go to Solution.
06-07-2017
11:00 AM
- last edited on
06-07-2017
11:45 AM
by
Danny
As long as you use the line level output, not the "Speaker" output, you should be fine. Never ever use the speaker output.
One of these would work too:
[link removed per forum guidelines]
You used to be able to get them at radio shack, sigh.
06-07-2017 06:34 AM
You're trying to do it backwards. You should be combining the audio and video in post-processing, not at real time, so that you can adjust the levels of each signal. Use an external recorder, not the camera, too.
06-07-2017
11:00 AM
- last edited on
06-07-2017
11:45 AM
by
Danny
As long as you use the line level output, not the "Speaker" output, you should be fine. Never ever use the speaker output.
One of these would work too:
[link removed per forum guidelines]
You used to be able to get them at radio shack, sigh.
06-07-2017 01:12 PM
Could you please tell me the name of the wire you are reccomending. Your link got blocked out.
06-07-2017 03:48 PM
Just google at amazon for line level to microphone adapter - it is all in one cable.
07/01/2024: New firmware updates are available.
06/06/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.4.0
Speedlite EL-5 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.