cancel
Showing results for 
Search instead for 
Did you mean: 

60D settings issue

NisiGirl
Apprentice

Greetings,

I have a Canon 60D that is approximately 8 years old.  Recently, I've noticed that my camera settings seem to be changing, or reverting on their own.  I shoot in manual mode.  What I'm seeing is that after changing the settings to, for example, ISO 3200, high-speed shooting mode, it will revert if I let it go idle for a bit.  This happened yesterday while shooting birds.  I set the settings, shot a few images, and then waited for a bit waiting for the birds to come back by.  When I went to shoot again, the iso had reverted back to 200 from 3200 and the shooting mode had returned to single-shot from high-speed shooting.  This happened last weekend, as well - also affecting ISO and shooting mode (timer).  At the time, I thought I had inadvertently changed the settings, but when it happened yesterday where I was just sitting there doing nothing.  Last weekend was the first time I noticed this happening, and I shoot on a regular basis.  Has anyone else experienced these little issues?  Any suggestions on how to fix it?

2 REPLIES 2

rs-eos
Whiz

The only thing I can recommend is to reset the camera and see if the problem goes away.

--
Ricky

EOS 5D IV, EF 50mm f/1.2L, EF 135mm f/2L, 600EX-RT (x6), ST-E3-RT
EOS C70, RF 24-70 f/2.8L IS, EF-EOS R 0.71x

Hi Nisigirl! {:-)

 

I have three EOS 60D units and still enjoy using them - they are a bit of a classic IMHO.  My units were bought 10 years ago, so apparently older than yours.

 

How old are your batteries?   If batteries are reaching the end of their lives they may drop voltage, and thus not keep settings constant.  If you have not done so, I suggest checking the battery health (ref p268 of the manual), initially using the battey settings feature of the camera, but also (if you can) checking the output using a volt meter.  If you have access to someone with fairly new batteries perhaps they will let you try theirs in your camera to see if the symptom persists.  A camera store may be able to help you with that one. 

 

If the batteries are old, or third party, it may well be the issue.  If you have doubts, I suggest investing in a new genuine Canon battery.


cheers, TREVOR

Professional photographer, engineer and educator since 1980

"All the beauty of life is made up of light and shadow", Leo Tolstoy;
"Skill in photography is acquired by practice and not by purchase" Percy W. Harris
"A good swordsman is more important than a good sword" Amit Kalantri
Technique will always Outlast Tech - Me
Announcements
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
03/22/2022: New firmware version 1.2.0 is available for PowerShot PICK
03/16/2022: New firmware version 1.5.2 is available for EOS-R5
03/16/2022: New firmware version 1.5.2 is available for EOS-R6
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.1.1 is available for EOS-R3
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!
12/7/2021: New firmware version 1.3.0 is available for Mount Adapter EF-EOS R 0.71x
12/7/2021: New firmware version 1.1.1 is available for CR-N 300
12/7/2021: New firmware version 1.1.1 is available for CR-N 500
12/2/2021: New firmware version 1.1.0 is available for RF 70-200 F4 L IS USM