05-08-2024 07:23 AM
So piggybacking on my last post, definitely photos are coming out washed out and loss of definition and sharpness. Believe there is sensor damage now from the eclipse but have no definitive evidence other than subjective “loss of quality.” What tests can I do to confirm this? Any output tests, etc.? There are zero burnt pixels, but overall the image quality looks very subtly burnt and overexposed
05-08-2024 09:01 AM - edited 05-08-2024 09:02 AM
You could try something like a colorite color checker, but without a "before" shot of the same conditions, it is hard to tell.
You could also rent another one and do a side by side comparison - even with the same lens on each!
Assuming that you had the eclipse image in focus, it is unlikely to have caused general damage to the sensor.
05-08-2024 09:55 AM
Greetings,
Unless you were shooting the eclipse without a filter, it's unlikely the sensor in your camera was damaged.
I would suggest starting your testing from a clean slate. Reset your main and custom settings to defaults. Establish a baseline and progress from there..
resetting
~Rick
Bay Area - CA
~R5 C (1.0.7.1) ~RF Trinity, ~RF 100 Macro, ~RF 100~400, ~RF 100~500, ~RF 200-800 +RF 1.4x TC, BG-R10, 430EX III-RT ~DxO PhotoLab Elite ~DaVinci Resolve ~ImageClass MF644Cdw/MF656Cdw ~Pixel 8 ~CarePaks Are Worth It
05-08-2024 10:09 AM
The whole point of shooting a total eclipse is to shoot it without a filter during totality!
However, you could wait too long - looking for Bailey's Beads - before you put it back on.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.