Showing results for 
Show  only  | Search instead for 
Did you mean: 




I noticed that the paper that is printing does not come out completely and stays a little inside the wheels that push it, so the second / third / fourth paper sticks and does not fall into the slot of the printed paper.

It's a paper matter or a blight because it's the first time that's happening to me.

Also when i make duplex printing on 10 pages for example, the printer will not print one page duplex(it prints only one side and the other leaves it blank.As a result i will miss this page and will not printing on the other page.).
I have an error that sais paper jamming but no paper jammed.
Any help?
Sorry for my english!


Hello, budhas!


Thank you for reaching out to Canon USA!

We appreciate your participation, however we need to let you know that the Canon Community is hosted and moderated within the United States by Canon USA. We are only able to provide support for Canon products manufactured for and used within the US market.

If you live outside the United States, please CLICK HERE and select your country or region for your support needs.

You're welcome to discuss Canon products sold outside of the United States, but please be aware that you will not receive support directly from Canon USA.


you should better help me than send me to onother forum.From this you let me to understand that you do not know how to help me.The printers are same for all.

Hello budhas,


Please see the Forum Guidelines HERE



For Immediate Response From Canon Support USA:
We value our customers and want to make sure we address your questions or issues in the best way possible but the Forum is not intended for customer service and direct support. If you have a customer service or support issue for a product manufactured for the United States market, please give our award-winning customer support a call at 1 (800) OK CANON or contact us online at


If you're outside the USA, please visit for support options in your country or region. 

Hello Stephen,

the only reason that i made post in this forum is that i thought it is for all customers.

Also i saw that many canon experts giving solutions and i thought that i had the chance to solve mine here.

Please accept my sincere apologies for any inconvenience caused!



03/14/2023: New firmware version 1.8.1 is available for EOS R6

03/02/2023: New Firmware Updates Are Available:

EOS R7 - Version 1.3.0EOS R10 - Version 1.3.0
02/24/2023: We've updated Share Your Photos

2/07/2023: New product announcements!

EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version is available for EOS-C500 Mark II
05/26/2022: New firmware version is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version is available for EOS R5 C
03/23/2022: New firmware version is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.