09-03-2020 01:19 PM
Printer has started to print a blank page each time i print. I've turned the power off and on. Same problem.
10-13-2020 11:07 AM
Hi CharlesC,
When your PIXMA MP160 does not print as expected, please remove both ink cartridges from the printer and make sure that the orange tape has been removed.
Next, please reinsert the ink cartridges and please perform 2 printhead cleanings:
1. Ensure that the printer is powered on and the LED displays a 1.
2. Press the <Maintenance> button once to display [H]. The Maintenance button is the button on the left hand side of the Operator's panel which has the wrench and screwdriver label above it.
3. Press the Black Start button. The cleaning will commence.
After performing 2 cleanings, please attmept to print.
If the issue persists, it is recommended that the ink cartridge is replaced.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.